You can not keep your bike from rust, if you stop completely. At the same time, there is no guarantee that if you stop with the wheel, it will rust. And just to add to this absurd idea makes no sense to buy a bicycle, if you're not afraid to use it against rust.
The situation is normal and simple - your bike often develop rust and you need to remove the rust as often as possible. And if you live in a humid environment orsalted state, you must process many times.
However, if you love your bike and want to offer an excellent service for an extended period, you must keep it clean as often as possible. Well, how much cleaning is required depends on the metal. For example, if the bicycle is equipped with aluminum or titanium frames, requires much less maintenance of a steel frame. And at the same time steel is considered the best metal frame for a bicycle. And if you continueReinforcing steel bike, you need a little 'cleaning and maintenance often. And there is no alternative to keep the bike other than periodic cleaning rust.
Often people make a big mistake when a new bicycle. They think that because the bike is new, does not need much care. But in reality, once you start the bike rusty, you once again. So the best solution is to clean and maintain more nearly ninePeriod.
How do you clean your bike?
Depends on how long you need to clean the machine. The best way is to wipe the bike clean with soft cotton after each race. You can then use some liquid cleaner (you can easily find multifunctional organic rust strippers on the market) to clean easily biking. The process will take no longer than five minutes, but keep the rust free bike for long.
Reserves the regular cleaning, you mustfinally cleaned every six months, the bicycle. This is important if you are a regular cyclist. However, if you regularly clean your bike, the process will not be too long.
In this process must remove all parts of the bike for cleaning proper. For example, you have the seatpost, pedals and cranks, if necessary, remove, you can also remove the forks.
Now you need to clean these parts separatelyDevice for removing rust or WD-40. If you have already bought some liquid rust cleaner for regular use, you can use for the treatment of rust and clean the inside of your bike for the photo. Meanwhile, the chain enjoyed the clean rust to clean properly.
If things are cleaned properly, you need to dry and oil every part with a lubricant or grease before installing the new one. Most experienced riders do not use grease or advice WD-40 bicycle parts --in particular the chain. You can find a nearby store chain lubricants to use in chains.
During the attempt to replace the wheel on other problems, like fixing the brake pads rays and resolve other necessary things that need attention immediately.
Now you can install all the parts and pedals for the content of the heart '.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น